The Brick is a LED outdoor solar wall light with motion sensor built in. So call the Brick, because of it's simple brick shaped design; it's an effective design to easily capture natural light from its solar panel above and emit artificial light from the LED capsule below.

This fixture will add understated and minimalist lighting to any outdoor space; whether modern or old, small or large areas, this fixture will discreetly fit in. These LED solar lights part of the Lutec Solar Garden Light Range. The design produces a downlight that washes your garden with a cool, vibrant light that is perfect for your garden or terrace during summer nights. The Brick has an in-built PIR with a wide angle to ensure the light is triggered when you need it.

PIR: a Passive Infrared Sensor is an electronic sensor that measures infrared light radiating from objects in its detection area. When this sensor identifies movement it turns on the light, so the area is lit up. This gives practical energy saving lighting and alerts you if someone is moving around your property. In terms of practicality, the light is there for you when you need it and is not wasting energy when you do not. If constant lighting in an area is not needed, then motion sensor lights are ideal. They ensure that when you are present you can see your surroundings, they switch off when no motion is detected. This saves energy, which is not just important to reduce energy bills for wired lights, but especially useful for Solar Lights, so that your charged battery lasts longer.

Although it only measures 18 cm wide, the shade expands the full under surface of the light, and the Solar Panel covers the full upper surface.

Solar lights are a worthy investment. Once you have purchased them, there are no further running costs, and no need for an Electrician to install them. As they are cable free and powered by daylight, you only need to pick a position in your outdoor space and follow the manufacturers guidelines on how to fix in place. Ensure your Solar lights are installed in an area that is not shaded, so that you give them maximum exposure to daylight. This will give them the full opportunity to charge so you have the output you require.

Solar Power is the eco-friendly choice, if you are energy conscious and care about the environment, choosing solar powered lighting fixtures is the best option. Using solar lights helps reduce the use of non-renewable energy sources, reduces your energy bill costs and gives you energy independence.

Depth : 95mm
Height : 48mm
Net Product Weight : 0.48kg
Total Weight Outer Carton (KG) : 3.43kg
Width : 180mm
Total Weight Unit Box (KG) : 0.53kg
Unit Box Depth : 6.0cm
Unit Box Height (CM) : 11.0cm
Unit Box Width (CM) : 19.0cm
Product Family : Brick
Product Type Light : Solar Light
Adjustable : No
Angle of Detection : 120°
Colour Temperature : 4000K
CRI : 80
Current : DC
Detection Distance : 0-12 Metres
Diffuser Material : Clear PC
Dimmable : Yes
Energy Efficiency : Aplus
Fixture Colour : Stainless Steel
Fixture Material : Stainless Steel
IP Rating : 44
Lamps Included : Yes
Lumens : 150lm
Maximum Frequency : 0Hz
Maximum Input Voltage : 0V
Maximum Operating Temperature : 50°C
Minimum Frequency Change : 0Hz
Minimum Input Voltage : 0V
Minimum Operating Temperature : -10°C
Number of LEDs : 3
Number of Light Sources : 1
PIR Lux : <40LUX
PIR Time Adjustments : 60S
PIR : Yes
Stainless Steel
Volts : 0V
Warranty (Years) : 2
Watts : 2w

Goods Return Procedure

If you wish to return unwanted items for a refund, you can do so as long as it is within 14 days of receiving the goods. You must have your receipt and the goods must be returned in new, unused and undamaged condition, with all packaging.

The returns process is as follows.

Customer will need to request a GRN (Goods Return Number/form) via email. Any goods sent back without a goods return note attached will not be accepted and will be returned to the customer at their cost.

Once you have been provided with a Goods Return form, you will be required to fill in all areas of the form, with a brief description of the reason for the return and enclose this with the returning item(s).

A label for the returns department address will also be supplied, this will have your own unique reference number which coincides with the GRN. Please then post the goods back at your own cost.

If the goods are sent to our sales office address in Liverpool, you will be charged for carriage to send to the correct returns address. (This will also delay the refund process).

Faulty Goods

If you wish to return goods because they have arrived faulty, please notify us of the fault via telephone or email as soon as you become aware of the fault.

On receipt of the goods, they will be inspected to check for the fault. If agreed to be faulty, we can either repair or replace the goods under warranty or we can refund the amount to your account. If however we do not find the goods to be faulty, they will be returned to you at your cost.